● Machine size: 1200mm*800mm*1420mm
● Output: 400-800KG/H
● Material: Stainless steel
● Power: 2.25KW
● Voltage: 220/380V
This equipment mainly consists of a driving device, a transmission drum, a conveyer belt, a groove type upper supporting roller, a lower supporting roller, a rack, a sweeper, a tension device, a turnabout drum, a guide chute, an electric control device, etc.
It adopts a screw tension device for tensioning the conveyer belt, wherein the screw tension device also can adjust off tracking of the belt conveyor.
Installation and Debugging
● The supporting legs, columns or platforms of the grading machine are horizontally placed on the ground.
● All the mounting bolts for various parts of the rack should be tightened.
● Carry out no-load commissioning after correction installation. The commissioning time should be not less than 2 hours, and it should carry out the following inspections:
1. It can be freely revolved.
2. There is no oil leakage in each lubrication part.
3. There is no loosening for each fastener.
● The temperature rise of each bearing should be not greater than 40°C, and the maximum temperature should not exceed 80°C.
● During normal operation, the conveyor should stably operate, and there should be neither off tracking nor abnormal noise.
Warm tips: we are glad to receive clients’ plant layout drawing, according to which we designers will design the best plan and its electric circuit and pipe arrangement.
When equipments sold out to your factory, we also have professional engineers fly to your country, install machines and train workers how to use and maintain them.
Please fill in the form below and leave your email if you want an offer sheets or project consultatio. Our support team will contact you in 24 hours. Thank you in advance!